Operating instructions
36
Additional Rinse and/or Wash Water Cooling
The washing machine is set up for extremely low water consumption.
• For people who suffer from an allergy to detergents, it can be useful
to rinse with more water (additional rinse).
• It can be necessary to cool down the water prior to pumping out in
order to avoid thermal damage to plastic waste pipes (wash water
cooling).
3
The program duration and water consumption are increased by wash
water cooling and/or the additional rinse.
Additional Rinse (RINSE +)
3
If this function is enabled, an additional rinse in performed for the pro-
grams COTTONS/LINEN, DELICATES and EASY-CARES.
As supplied from the factory, the additional rinse function is not enab-
led.
Enabling the additional rinse function:
0 1. Turn the program selector to SHORT SPIN.
2. Press the SOAKING button for at least 5 seconds.
After the button has been kept pressed for 5 seconds, RINSE
+ flashes
on the program progress indicator for 5 seconds.
3. Release the SOAKING button while RINSE
+ is flashing.
The additional rinse function is enabled once the flashing has ceased. It
continues to be enabled until specifically disabled.
When the additional rinse function is enabled, the RINSE
+ indicator on
the program progress display illuminates prior to program start and
during the additional rinse.
4. If you wish to check whether the additional rinse function is enabled:
– Turn the program selector to SHORT SPIN.
– Press the SOAKING button briefly.
If RINSE
+ flashes on the program progress display, the additional rinse
function is enabled.
Disabling the additional rinse function:
0 1. Turn the program selector to SHORT SPIN.
2. Press the SOAKING button for at least 5 seconds.
As soon as the button is pressed RINSE
+ flashes on the program pro-
gress display. After 5 seconds RINSE
+ ceases to flash and illuminates
continuously for a further 5 seconds.
Comments to this Manuals