AEG L9FEC966R User Manual download pdf (Page 20)

If the Extra Rinse is set as a

default option and you

select a compatible washing

programme, the display

shows . In this case, by

pressing the Extra Rinse

button , it is possible to add

just one rinse.

8.7 Plus Steam

This option adds a steam phase followed

by a short anti-crease phase at the end

of the washing programme.

The steam phase reduces fabric creasing

and facilitates the fabric ironing.

The indicator flashes on the display

during steam phase.

This option can increase the

programme duration.

When the programme stops the display

shows a zero

, the indicator is

steady on and the indicator starts

flashing. The drum performs smooth

movements for about 30 minutes to keep

the steam benefit. By touching any

button the anti-crease movements stop

and the door unlocks.

A small laundry load helps to

reach better results.

8.8 Eco

The Eco option reduces the energy

consumption maintaining good washing

results.

Set this option for slightly or normally

soiled items washed at 30°C or higher

temperatures.

Water and energy consumption may

depend on different causes, such as

water pressure, its hardness and

temperature, ambient temperature, type

and quantity of laundry, the set options,

spin speed and voltage fluctuations in

the electricity network. The display shows

the indicator

.

If you select the Cotton

programme at 40°C or 60°C

and no other options are set,

the display shows the

indicator ; these are

the standard cotton

programmes, the most

efficient programmes in

terms of combined energy

and water consumption.

8.9 Time Save

With this option you can decrease the

programme duration.

• If your laundry is normally or lightly

soiled, it may be advisable to shorten

the washing programme. Touch this

button once to decrease the duration.

• In case of smaller load, touch this

button twice to set an extra quick

programme.

The display shows the indicator .

This option can also be used

to shorten the Steam

programme duration.

8.10 Skipping phase button

(Options)

By touching this button you can set:

• Rinse only at first touch. The washing

programme starts from the rinsing

phase by skipping the wash phase.

All set options (except

permanent extra rinse)

are deselected

automatically.

• Spin only at second touch. The

appliance skips wash and rinse phase.

• Drain only at third touch. The

appliance performs only the drain

phase.

At firth touch the appliance

proposes the default setting

of the washing programme

again.

www.aeg.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments