AEG L9FEA966C User Manual download pdf (Page 34)

13.6 Loading the laundry

1. Open the appliance door.

The weight sensor window pops up.

Cottons 40

9 kg

Ready to start

2. Shake the garments before you put

them in the drum.

3. Put the laundry in the drum, one item

at time.

On the display the weight of the laundry

is updated by steps of 0.5 kg and the

programme duration is updated

accordingly when you return to the

programme summary screen.

If you put in the drum more

laundry than the maximum

load, the display tells that

the suggested load has

been exceeded.

You can wash your laundry

anyway, but the water and

energy consumption

increase.

To have the best

consumption and washing

performance remove the

excess items.

The overload indication is

shown only in programmes

with a maximum load lower

than the appliance

maximum load.

4. Close the door. Make sure that no

laundry stays between the seal and

the door. There is a risk of water

leakage or damage to the laundry.

5. If you have already set Detergent

Type 1 or Detergent Type 2 with

average suggested dosage for the

type of detergent you are using , the

appliance recommends the

detergent quantity to pour.

Cottons 40

Detergent advice:

Type 1 / Type 2

60ml / 50ml

Ready to start

Refer to the "Detergent Dosing" section

in the chapter "Settings".

If you change the washing

programme after closing the

door, the display may tell

you that the laundry is now

exceeding the maximum

recommended load for the

new programme: open the

door and remove a few

garments.

13.7 Filling the detergent and

additives

We recommend that you do

not exceed the maximum

indicated level ( ).

1. Open the detergent dispenser.

www.aeg.com

34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

Comments to this Manuals

No comments