AEG L99695HWD User Manual download pdf (Page 43)

16.7 Water-stop device

The inlet hose has a water stop device. This

device prevents water leaks in the hose

because of its natural ageing.

The red sector in the window «A» shows this

fault.

If this occur, close the water tap and contact

the service centre to replace the hose.

16.8 Water drainage

There are different procedures to connect the drain hose:

With the plastic hose guide:

• Making an U form with the drain hose.

On the edge of a sink

• Make sure that the plastic guide cannot

move when the appliance drains. Attach

the guide to the water tap or the wall.

To a stand pipe with vent-hole

• Directly into a drain pipe at a height of not

less than 60 cm (23.6”) and not more than

100 cm (39.3”). Refer to the illustration.

• The end of the drain hose must always be

ventilated , i.e. the inner diameter of the

drain pipe (min. 38 mm - min. 1.5”) must

be larger than the external diameter of the

drain hose.

ENGLISH 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

No comments

AEG L99695HWD User Manual Page 43