AEG L99695HWD User Manual download pdf (Page 34)

WARNING!

Make sure that the temperature is more than 5 °C and the water is flowing

from the tap before you use the appliance again.

The manufacturer is not responsible for damages caused by low

temperatures.

15. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

15.1 Introduction

The start of the appliance does not occur or it stops during operation.

First try to find a solution to the problem (refer to the table). If not, contact the Authorised

Service Centre.

CAUTION!

Deactivate the appliance before you do the checks.

With some problems, the acoustic signals operate and the display shows an alarm

message:

15.2 Possible failures

Problems with alarm messages

Message Possible solution

The display tells to check the

tap: the appliance does not

fill with water.

Make sure that the water tap is open.

Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authori-

ty.

Make sure that the water tap is not clogged or is furred

with lime-scale.

Make sure that the filter of the inlet hose and the filter of

the valve are not clogged. Refer to “Care and cleaning”.

Make sure that the inlet hose is not damaged.

Make sure that the connection of the water inlet hose is

correct.

The display tells to check the

drain filter: the appliance

does not drain the water.

Make sure that the drain hose is not damaged.

Make sure that the drain filter is not clogged. Clean the

filter, if necessary. Refer to 'Care and cleaning'.

www.aeg.com34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

No comments

AEG L99695HWD User Manual Page 34