AEG L98485FL User Manual download pdf (Page 4)

To replace the internal lamp,

contact the service centre.

Disconnect the mains plug from

the mains socket before the re-

placement of the internal lamp.

1.6 Installation

• The appliance is heavy, be careful

when you move it.

• Do not transport your appliance with-

out the transit bolts, you can damage

internal components and cause leak-

ages or malfunctions.

• Do not install and connect a damaged

appliance.

• Make sure to remove all packaging

and transport bolts.

• Make sure that the mains plug is dis-

connected from the mains socket dur-

ing installation.

• Only a qualified person must do the

electrical installation, the plumbing

and the installation of the appliance.

This to prevent the risks of structural

damage or injury.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• When you install the appliance on a

carpet floor, make sure that there is air

circulation between the appliance and

the carpet. Adjust the feet to have the

necessary space between the appli-

ance and the carpet.

Water connection

• Do not connect the appliance with old

hoses already used. Only use new ho-

ses.

• Make sure not to cause damage to the

water hoses.

• Do not connect the appliance to new

pipes or pipes not used for a long

time. Let the water flow for some mi-

nutes, then connect the inlet hose.

• The first time you use the appliance,

make sure that the water hoses and

the couplings do not have leakages.

Electrical connection

• Make sure that the appliance is earth-

ed.

• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply.

• Always use a correctly installed shock-

proof socket.

• Do not use multiple plugs and exten-

sion cables. There is a risk of fire.

• Do not replace or change the mains

cable. Contact the service centre.

• Make sure not to cause damage to the

mains plug and cable.

• Connect the mains plug to the mains

socket only at the end of the installa-

tion. Make sure that there is access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

1.7 Discard the appliance

1.

Disconnect the mains plug from the

mains socket.

2.

Cut off the mains cable and discard

it.

3.

Discard the door catch. This pre-

vents children or pets to be closed

in the appliance. There is a risk of

suffocation (only for front-loading

appliances).

2. TECHNICAL INFORMATION

Dimensions Width / Height / Depth 600 / 850 / 600 mm

Total depth 640 mm

4

www.aeg.com

1 2 3 4 5 6 7 8 9 ... 71 72

Comments to this Manuals

No comments