AEG L87695WD User Manual download pdf (Page 24)

Iron dry level

The drying time symbol goes off

The display shows a time value,

calculated on a default load size. If the

amount of your laundry is more or less

than the default size, the appliance

adjusts automatically the time value

during the cycle.

2. Press button Start/Pauze - Départ/

Pause to start the programme. In the

display:

The door locked symbol comes on.

The drying symbol starts to flash.

The symbol of the set level stays on

(e.g. Cupboard dry).

The other level symbols go off.

The display updates regularly the drying

cycle time (every minute).

You cannot set all levels for

all kind of laundry (refer to

"Programmes for automatic

drying" table) .

10.3 Timed drying

1. Press button Droogtijd - Minuterie

repeatedly to set the time value (see

the «Drying Programme» table).

The drying symbol comes on.

The anti-crease symbol comes on.

The drying time symbol comes on.

Set time value.

Each time you press this button the time

value increases by 5 minutes. The display

shows the set time value.

After some seconds the set time value on

the display changes: the appliance

calculates also the duration of the anti-

crease and the cooling phases.

Final time value.

2. Press Start/Pauze - Départ/Pause to

start the programme. The text bar

tells that the appliance is drying. The

display shows the new time value

every minute.

The drying symbol starts to flash.

The door locked symbol comes on.

If you set the time value of

only 10 minutes, the

appliance performs only a

cooling phase.

10.4 At the end of the drying

programme

1. The appliance stops automatically.

2. The acoustic signals operate (if they

are active).

3. In the display

comes on.

4. The indicator of button Start/Pauze -

Départ/Pause goes off.

5. The last minutes of the drying cycle

the appliance performs the anti-

crease phase.

The anti-crease symbol

flashes.

The door is still locked (the symbol

is on).

6. Press button Aan/Uit - Marche/Arrêt

for some seconds to deactivate the

appliance.

www.aeg.com

24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comments to this Manuals

No comments