AEG L87695WD User Manual download pdf (Page 21)

The related indicator flashes.

2. Press button Delay Start repeatedly

until the display shows

.

3. Press button Start/Pause again to

start the programme immediately.

9.11 Interrupting a

programme and changing a

function

You can change only some options

before they operate.

1. Press button Start/Pause.

The related indicator flashes.

2. Change the function set.

3. Press the button Start/Pause again.

The programme continues.

9.12 Cancelling a running

programme

1. Press button On/Off to cancel the

programme and to deactivate the

appliance.

2. Press button On/Off again to activate

the appliance.

Now, you can set a new washing

programme.

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

9.13 Opening the door

If the temperature and level

of the water in the drum are

too high and the drum still

rotates you cannot open the

door.

While a programme or the delay start

operates, the appliance door is locked.

1. Press button Start/Pause.

In the display the related door lock

indicator goes off.

2. Open the appliance door.

3. Close the door and press button

Start/Pause.

The programme or the delay start

continues.

9.14 End of cycle

When the programme has finished, the

appliance stops automatically. The

acoustic signal operates (if it is active).

In the display

comes on and the door

locked indicator

goes off.

The indicator of Start/Pause button goes

off.

1. Press button On/Off to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last set

programme. Turn the

programme knob to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door ajar, to prevent

mildew and odours

9.15 Draining water out after

end of cycle

The washing programme is completed,

but there is water in the drum:

The drum turns regularly to prevent the

creases in the laundry.

The door lock indicator

is on. The

door stays locked.

You must drain the water to open the

door:

1. If necessary, decrease the spin

speed.

2. Press the Start/Pause button.

The appliance drains the water and

spins.

3. When the programme is completed

and the door lock indicator

goes

off, you can open the door .

4. Press On/Off some seconds to

deactivate the appliance.

The appliance drains and

spins automatically after

approximately18 hours.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Comments to this Manuals

No comments