AEG L87695WD User Manual download pdf (Page 12)

– Press two times to set 'Extra Quick' for

items with light soil.

Some programmes accept only

one of the two functions.

5.9 Extra rinse button

9

Press button

9

to add rinsing phases to

a programme.

Use this function for persons allergic to

detergents and in areas where the water

is soft.

5.10 The Stain-Prewash button

10

Press button

10

to add the stain and/or

a prewash phase to a programme.

Press the button again and again to acti-

vate one or two options. The related

symbol and the indicator bar comes on

in the display.

STAIN

• Use this function for laundry with hard

stains to remove.

When you set this function, put the

stain remover into compartment

.

This function increases the pro-

gramme duration.

This function is not available with

a temperature lower than 40° C.

PREWASH

• Use this function to add a prewash

phase before the washing phase. We

recommend that you use this function

when you have laundry with a high lev-

el of soil.

The set of this function increases

the programme duration.

5.11 Spin button

11

Press this button to:

• Decrease the maximum speed of the

spin phase of the programme.

The display shows only the spin

speeds available with the set

programme.

• Deactivate the spin phase.

• Activate the 'Rinse Hold' function. Set

this function to prevent fabric creases.

The appliance does not drain the wa-

ter when the programme is comple-

ted.

5.12 Temperature button

12

Press button

12

to change the default

temperature. When the display shows

- -, the appliance does not heat the wa-

ter.

5.13 Acoustic signals function

You can hear the acoustic signals when:

• You activate the appliance.

• You deactivate the appliance.

• You press the buttons.

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic sig-

nals, press button

10

and button

9

at

the same time for 6 seconds.

If you deactivate the acoustic sig-

nals, they continue operate only

when you press the buttons and

when a malfunction occurs.

5.14 Child lock function

This function prevents children to play

with the control panel.

• To activate the function, press button

12

and button

11

at the same time

until the display shows the symbol

.

• To deactivate the function, press but-

ton

12

and button

11

at the same

time until the symbol

goes off.

You can activate the function:

• Before you press the Start/Pause but-

ton

6

: the appliance cannot start.

• After you press the Start/Pause button

6

, all the buttons and the pro-

gramme knob are deactivated.

5.15 Permanent extra rinse

function

With this function you can keep the extra

rinse function permanently on when you

set a new programme.

12

www.aeg.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Comments to this Manuals

No comments