AEG L82470BI User Manual download pdf (Page 28)

• After having levelled the appliance,

tighten the lock nuts.

WARNING!

Never place cardboard, wood or similar materials under the appliance to

compensate for any unevenness in the floor.

14.3 The inlet hose

• Connect the hose to the back appliance.

Turn the inlet hose only left or right.

• Loose the ring nut to set it in the correct

position.

• Connect the water inlet hose to the cold

water tap with 3/4" thread.

CAUTION!

Make sure that there are no

leaks from the couplings.

Do not use an extension hose if the inlet hose is too short. Contact the

service centre for the replacement of the inlet hose.

14.4 Water drainage

There are different procedures to connect the drain hose:

With the plastic hose guide.

www.aeg.com28

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

AEG L82470BI User Manual Page 28