AEG L82470BI User Manual

USER MANUALEN User ManualWashing MachineL82470BI

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Spin7 kg1400 rpmTo spin the laundry and to dr

Programme options compatibilityProgrammeSpin 1) 2)Time Save 3)Cottons Cottons Eco Easy Iron Delicates

At the start of the programme, the display shows the programme dura-tion for the maximum load capacity.During the washing phase the programme duration

• RINSE HOLD If you select this option, the water ofthe last rinse is not emptied out toprevent the fabrics from creasing. Atthe end of the programme,

The display shows the decreasedwashing time7.6 Delay StartWith this option you can delay the startof a programme from 30 minutes to 20hours.The displa

CAUTION!Make sure that no laundrybecomes trapped betweenthe seal and the door. Thereis a risk of water leakage ordamage to the laundry.10.2 Setting a

10.5 Filling the detergent andadditivesMAXCompartment for prewash phase,soak programme or stain remover.Compartment for washing phase.Compartment for

10.9 Cancelling a runningprogrammeTurn the selector dial to Off to cancel aprogramme which is running. Now youcan select a new programme.Before starti

• Do not wash white and coloureditems together.• Some coloured items can discolourwith the first wash. We recommendthat you wash them separately for t

12. CARE AND CLEANINGWARNING!Refer to Safety chapters.12.1 External cleaningClean the appliance with soap and warmwater only. Fully dry all the surfac

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

3. 4.MAX12.6 Cleaning the drain filterThe pump should be inspected regularly and particularly if:• The appliance does not empty and/or spin.• The appl

4. Release the emergency emptying hose,place it in the container and remove its capcover.125. When no more water comes out, unscrewthe filter cover by

12.7 Cleaning the inlet hose and the valve filter1.1232.3. 4.45°20°12.8 Frost precautionsIf the appliance is installed in an areawhere the temperature

First try to find a solution to the problem(refer to the table). If the problempersists, contact the Authorised ServiceCentre.With some problems, the

Problem Possible solutionThere is water on thefloor.• Make sure that the couplings of the water hoses are tightand there is not water leakages.• Make

Use the gloves. Remove the external film. Ifnecessary, use a cutter.Remove the cardboard top. Remove thepolystyrene packaging materials.Remove the int

Put one of the polystyrene packagingelements on the floor behind the appliance.Carefully put down the appliance with therear side on it. Make sure not

Remove the three bolts. Use the key suppliedwith the appliance. Pull out the plasticspacers.Put the plastic caps in the holes. You can findthese caps

• After having levelled the appliance,tighten the lock nuts.WARNING!Never place cardboard, wood or similar materials under the appliance tocompensate

• Make a U shape with the drain hose.On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide to

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f

To a sink spigot• Refer to the illustration. Put the drain hosein the spigot and tighten it with a clip.• Make sure that the drain hose makes aloop to

16-22 mm22±1,5 mm416mmX595-598 mmØ 35 mm14 mmDoorThe dimensions of the door should be:• width 595 - 598 mm• thickness 16-22 mm• the height X depends o

ABCEDWARNING!Do not remove the screw B.If the door has to be opened from left toright, invert the position of the plates E, themagnet D and the plate

ENGLISH 33

www.aeg.com34

ENGLISH 35

www.aeg.com/shop132938102-A-512016

• The ventilation opening in the base (if applicable)must not be covered by a carpet, mat, or any floorcovering.• The appliance must be connected to t

cable. Should the mains cable needto be replaced, this must be carriedout by our Authorised Service Centre.• Connect the mains plug to the mainssocket

3. PRODUCT DESCRIPTION3.1 Appliance overview7 8 9101 234561Detergent dispenser2Control panel3Door handle4Rating plate5Drain pump filter6Feet for level

To close the door, turn the deviceanticlockwise until the groove is vertical.4. CONTROL PANEL4.1 Control Panel descriptionCottonsSyntheticsEasy IronDe

ATemperature value and COLD indicator.BSpin Speed value, RINSE HOLD , NIGHT CYCLE - indicators.CProgramme progress display: PREWASH , MAIN WASH

HDOOR - indicator.• This indicator shows if the door can be opened:– The indicator is on: the door cannot be opened. The appliance is per-forming a