AEG L7WEE962 User Manual download pdf (Page 26)

10.11 Cancelling a running

programme

1. Press the button On/Off to cancel

the programme and to deactivate

the appliance.

2. Press the button On/Off again to

activate the appliance.

Now, you can set a new washing

programme.

If the ProSense phase is

already carried out and the

water filling is already

started, the new programme

starts without repeating

the ProSense phase. The

water and the detergent are

not drained out in order to

avoid waste. The display

shows the maximum

duration of the programme,

updating it about 20 minutes

after the starting of the new

programme.

10.12 Opening the door

If the temperature and level

of the water in the drum are

too high and/or the drum

still rotates you cannot open

the door.

While a programme or the delay start

operates, the appliance door is locked.

1. Touch the button Inicio/Pausa.

In the display the related door lock

indicator goes off.

2. Open the appliance door. If

necessary, add or remove the items.

3. Close the door and touch the button

Inicio/Pausa.

The programme or the delay start

continues.

10.13 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are

active).

In the display all washing phase

indicators become steady and the time

area shows .

The indicator of the Inicio/Pausa button

goes off.

The door unlocks and the indicator

goes off.

flashes at the end of the

programme in case of overloaded drum.

1. Press the On/Off button to

deactivate the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last

selected programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

10.14 Draining water out after

end of cycle

If you have chosen a programme or an

option that does not empty out the

water of the last rinse, the programme is

completed, but:

• The display shows the door locked

indicator

• The drum still turns at regular intervals

to prevent the creases in the laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, touch the Centrif.

button to decrease the spin speed

proposed by the appliance.

2. Press Inicio/Pausa to continue the

cycle

3. When the programme is completed

and the door locked indicator

goes off, you can open the door.

www.aeg.com

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Comments to this Manuals

No comments