AEG L7WEE962 User Manual download pdf (Page 14)

6. DIAL AND BUTTONS

6.1 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.

As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.

For more details, refer to Stand-by

paragraph in Daily Use chapter.

6.2 Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

6.3 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and , the appliance does not

heat the water.

6.4 Centrif.

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.

Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Set the Drenar option (Skipping the

wash, rinse and spin phases) .

The appliance performs the only

draining phase of the selected

washing programme.

The display shows the indicator

(cold), and the indicator (no

spin) and the indicator

.

• Set the Centrif. option (Skipping the

wash and rinse phases) .

The appliance performs only the

spinning phase of the selected

washing programme.

The display shows the indicator

(cold), the phase indicator and the

spin speed.

If it is necessary to reduce

the spin speed, select a

programme with a lower

spin speed as default.

6.5 Manchas/Pre-Lav.

Press this button repeatedly to activate

one of the two options.

The relevant indicator goes on in the

display.

• Manchas

Select this option to add an anti-stain

phase to a programme in order to

treat heavily soiled or stained laundry

with stain remover.

Pour the stain remover into

compartment

. The stain remover

will be added in the appropriate

phase of the washing programme.

This option is not

available with a

temperature lower than

40 °C.

• Pré-lavado

Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

www.aeg.com

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments