AEG L7WEC166R User Manual download pdf (Page 24)

• After you touch the Start/Pause

button: all the buttons and the

programme dial are deactivated

(except On/Off button ).

• Before you touch the Start/Pause

button: the appliance cannot start.

The appliance keeps the selection of this

option after you switch it off.

9.2 Acoustic signals

This appliance is provided with different

acoustic signals, that operate when:

• You activate the appliance (special

short tune).

• You deactivate the appliance (special

short tune).

• You touch the buttons (click sound).

• You make a wrong selection (3 short

sounds).

• The programme is completed

(sequence of sounds for about 2

minutes).

• The appliance has a malfunction

(sequence of short sounds for about 5

minutes).

To deactivate/activate the acoustic

signals when the programme is

completed, touch the Delay Start and

the Quick Wash buttons simultaneously

for about 6 seconds.

If you deactivate the

acoustic signals, they

continue operate when the

appliance has a malfunction.

9.3 Permanent Extra Rinse

With this option you can permanently

have one or two extra rinses when you

set a new programme.

• Simultaneously touch the Temp.

button and the Spin button once to

add one extra rinse.

appears on

the display.

• Simultaneously touch the Temp.

button and the Spin button twice to

add two extra rinses.

appears on

the display.

• Simultaneously touch the Temp.

button and the Spin button three

times to remove extra rinses. The

display only shows .

10. DAILY USE

WARNING!

Refer to Safety chapters.

10.1 Using weight sensors

For a correct use of the

weight sensor, the drum

must be empty when

activating the appliance.

Set the programme BEFORE

you put the laundry in the

drum.

10.2 Before activating the

appliance

1. Make sure that the mains plug is

connected to the mains socket.

2. Make sure that the water tap is open.

10.3 Activating the appliance

and setting a programme

1. Press button On/Off for a few

seconds to activate the appliance.

The programme dial is automatically set

on cotton programme and only the Wash

indicator is on.

The indicator of Start/Pause button

flashes.

2. Turn the programme knob to the

necessary programme.

The programme indicator comes on.

The display shows the maximum load,

the default temperature, the maximum

spin speed, the indicators of the phases

making up the programme and the

programme duration.

3. If it is necessary, touch the Temp.

button and the Spin button to

change the water temperature and

the spin speed.

www.aeg.com

24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Comments to this Manuals

No comments