AEG L7WEC166R User Manual download pdf (Page 41)

Problem Possible solution

The washing results are

not satisfactory.

• Increase the detergent quantity or use a different deter-

gent.

• Use special products to remove the stubborn stains before

you wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

Too much foam in the

drum during the washing

cycle.

• Reduce the quantity of detergent.

After the washing cycle,

there are some deter-

gent residues in the dis-

penser drawer.

• Make sure that the flap is in the correct position (UP for

powder detergent - DOWN for liquid detergent).

• Make sure you have used the detergent dispenser accord-

ing the indications given in this user manual.

The drum is empty and

the display shows there is

some weight in.

• Press the On/Off button to deactivate the appliance and

activate it again to set a tare.

The drum is full but the

display shows 0.0 kg.

• You loaded the laundry before activating the appliance.

Press the On/Off button to deactivate the appliance.

• Empty the drum and follow the necessary steps. (Refer to

"Loading the laundry")

The appliance does not

dry or does not dry cor-

rectly.

• Turn the water tap on.

• Make sure the drain filter is not clogged.

• Reduce the laundry load.

• Make sure you have set the correct cycle. if necessary, set

again a short drying time.

The laundry is full of dif-

ferent colours fluff.

The fabrics washed in the previous cycle released fluff of a dif-

ferent colour:

• The drying phase helps to eliminate some fluff.

• Clean the clothes with a fluff remover.

In case of an excessive amount of fluff in the drum run the spe-

cial programme to clean it (refer to “Fluff in the fabrics" for

more details).

After the check, activate the appliance. The programme continues from the point of

interruption.

If the problem occurs again, contact the Authorised Service Centre.

If the display shows other alarm codes. Deactivate and activate the appliance. If the

problem continues, contact the Authorised Service Centre.

16.3 Emergency door opening

In case of power failure or functioning

failure the appliance door remains

locked. The washing programme

continues when the power is restored. If

the door remains locked in case of

failure, it is possible to open it using the

emergency unlock function.

Before opening the door:

ENGLISH 41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

AEG L7WEC166R User Manual Page 41

Comments to this Manuals

Related products and manuals for Washing machines AEG L7WEC166R