AEG L76485HFL User Manual download pdf (Page 23)

11. TROUBLESHOOTING

The start of the appliance does not oc-

cur or it stops during operation.

First try to find a solution to the problem

(refer to the table). If not, contact the

service centre.

With some problems, the acoustic

signals operate and the display shows

an alarm code:

•

- The appliance does not fill with

water.

•

- The appliance does not drain

the water.

•

- The appliance door is open or

not closed correctly.

•

- The anti-flood device is on.

WARNING!

Deactivate the appliance before

you do the checks.

Problem Possible cause Possible solution

The appliance

does not fill with

water.

The water taps is closed. Open the water taps.

The water inlet hoses

are damaged.

Make sure that the water inlet

hoses have no damages.

The filters in the water

inlet hoses are blocked .

Clean the filters. Refer to 'Care

and cleaning'.

The water taps are

blocked or are furred

with limescale.

Clean the water taps.

The connection of the

water inlet hoses is not

correct.

Make sure that the connection

is correct.

The water pressure is

too low.

Contact your local water author-

ity.

The appliance

does not drain the

water.

The water drain hose is

damaged.

Make sure that the water drain

hose has no damages.

The filter of the drain

pump is blocked.

Clean the filter of the drain

pump. Refer to 'Care and clean-

ing'.

The connection of the

water drain hose is not

correct.

Make sure that the connection

is correct.

A washing programme

without the drain phase

is set.

Set the drain programme.

The function Rinse &

Hold is on.

Set the drain programme.

The appliance

door is open or

not closed cor-

rectly.

Close the door correctly.

ENGLISH 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Comments to this Manuals

No comments