AEG L76285FL User Manual download pdf (Page 17)

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

10.12 Opening the door

If the temperature and level

of the water in the drum are

too high and the drum still

rotates you cannot open the

door.

While a programme or the delay start

operates, the appliance door is locked.

1. Press button Start/Pause.

In the display the related door lock

indicator goes off.

2. Open the appliance door.

3. Close the door and press button

Start/Pause.

The programme or the delay start

continues.

10.13 End of cycle

When the programme has finished, the

appliance stops automatically. The

acoustic signal operates (if it is active).

In the display comes on and the door

locked indicator goes off.

The indicator of Start/Pause button goes

off.

1. Press button On/Off to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last set

programme. Turn the

programme knob to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door ajar, to prevent

mildew and odours

10.14 Draining water out after

end of cycle

The washing programme is completed,

but there is water in the drum:

The drum turns regularly to prevent the

creases in the laundry.

The door lock indicator

is on. The

door stays locked.

You must drain the water to open the

door:

1. If necessary, decrease the spin

speed.

2. Press the Start/Pause button.

The appliance drains the water and

spins.

3. When the programme is completed

and the door lock indicator

goes

off, you can open the door .

4. Press On/Off some seconds to

deactivate the appliance.

The appliance drains and

spins automatically after

approximately18 hours.

10.15 AUTO Stand-by option

The AUTO Stand-by function

automatically deactivates the appliance

to decrease the energy consumption

when:

• You do not use the appliance for 5

minutes before you press Start/Pause

button.

Press the button On/Off to activate

the appliance again.

• After 5 minutes from the end of the

washing programme

Press the button On/Off to activate

the appliance again.

The display shows the end of the last

set programme.

Turn the programme knob to set a

new cycle.

If you set a programme or an

option that ends with water

in the drum, the AUTO

Stand-by function doesn't

deactivate the appliance to

remind you to drain the

water.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments