AEG L73283FL User Manual download pdf (Page 14)

9.5 Starting a programme

without delay start

Press Start/Pause:

• The indicator Start/Pause stops to

flash and stays on.

•

The indicator

starts to flash on the

display.

• The programme starts, the door is

locked and the display shows the indi-

cator

.

• The drain pump can operate for a

short time when the appliance fills wa-

ter.

After approximately 15 minutes

from the start of the programme:

• The appliance adjusts auto-

matically the programme dura-

tion agree with the laundry

load.

• The display shows the new val-

ue.

9.6 Starting a programme with

delay start

• Press Delay Start again and again until

the display shows the delay you want

to set. The related indicator comes on

the display.

• Press Start/Pause:

– The appliance starts the countdown.

– When the countdown is completed,

the programme starts automatically.

You can cancel or change the set

of the delay start before you

press Start/Pause .

To cancel the delay start:

1.

Press Start/Pause to set the appli-

ance to pause.

2.

Press Delay Start until the display

shows

’.

Press Start/Pause again to start the

programme immediately.

9.7 Interrupting a programme

and changing the options

You can change only some options be-

fore they operate.

1.

Press Start/Pause. The indicator

flashes.

2.

Change the options.

3.

Press Start/Pause again. The pro-

gramme continues.

9.8 Cancelling a programme

1.

Press On/Off for some seconds to

cancel the programme and to deac-

tivate the appliance.

2.

Press the same button again to acti-

vate the appliance. Now, you can set

a new washing programme.

The appliance does not drain the

water.

9.9 Changing the options

You can change only some options be-

fore they operate.

1.

Press Start/Pause. The related indi-

cator flashes.

2.

Change the options.

3.

Press Start/Pause again. The pro-

gramme continues.

9.10 Opening the door

While a programme or the delay start

operates, the appliance door is locked

and the display shows the indicator

.

CAUTION!

If the temperature and level of

the water in the drum are too

high, you cannot open the door.

Open the appliance door when the

delay start operates:

1.

Press Start/Pause to pause the appli-

ance.

2.

Wait until the door lock indicator

goes off.

3.

Open the door.

4.

Close the door and press Start/

Pause again. The delay start contin-

ues to operate.

Open the appliance door when the

programme operates:

1.

Press On/Off for some seconds to

deactivate the appliance.

2.

Wait for some minutes and then

open carefully the appliance door.

14

www.aeg.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments