L 73283 FL EN User manual
The data of this table are approximate. Different causes can change the da-ta: the quantity and type of laundry, the water and ambient temperature.Pro
• The washing programme stops withthe water in the drum. The drum turnsregularly to prevent the laundry crea-ses.• The door stays locked. You must dra
8. BEFORE FIRST USE1.Put 2 litre of water in the detergentcompartment for washing phase.This activates the drain system.2.Put a small quantity of dete
Liquid or powder detergent1.122.A3.B4.• Position A for powder detergent (factory setting).• Position B for liquid detergent.When you use the liquid de
9.5 Starting a programmewithout delay startPress Start/Pause:• The indicator Start/Pause stops toflash and stays on.•The indicator starts to flash on
3.Close the appliance door.4.Set the programme again.9.11 At the end of theprogramme• The appliance stops automatically.• The acoustic signal operates
– Use a washing bag to wash smallitems.• A very small load can cause balanceproblems with the spin phase. If thisoccurs, adjust manually the items int
11.3 Maintenance washWith the low temperature programmes itis possible that some detergent stays inthe drum. Make regularly a maintenancewash. To do t
1. 2.2113. 4.215.126.7. 8.2118www.aeg.com
9. 11.7 Cleaning the inlet hose and the valve filter1.1232.3. 4.45°20°11.8 Emergency drainBecause of a malfunction, the appliancecannot drain the wat
CONTENTS1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. SAFETY
1.Disconnect the mains plug from themains socket.2.Close the water tap.3.Remove the water inlet hose.4.Put the two ends of the inlet hose ina containe
Problem Possible solution Make sure that the connection of the water inlet hoseis correct.The appliance doesnot drain the water.Make sure that the si
Problem Possible solution Use special products to remove the stubborn stains be-fore you wash the laundry. Make sure that you set the correct temper
ENGLISH 23
www.aeg.com/shop132913240-A-102013
1. SAFETY INFORMATIONBefore the installation and use of the appliance, careful-ly read the supplied instructions. The manufacturer isnot responsible i
• If the supply cord is damaged, it must be replaced bythe manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard.
Water connection• Make sure not to cause damage to thewater hoses.• The appliance is to be connected tothe water mains using the new sup-plied hose-se
3. PRODUCT DESCRIPTION1 2 356741Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump filter7Feet for the appliance level3.1 F
4.1 DisplayA B C DA)The temperature area:– : Temperature indicator– : Cold water indicator.B)The spin area:– : the Spin speed indicator– : the No Spin
ProgrammeTemperature rangeType of load and soilMaximum load, Maximum spinEasy Iron1)60°C - ColdSynthetic fabric items. Normal soil and light soil.3 kg
Programme options compatibilityProgramme + Prewash + Prewash
Comments to this Manuals