AEG L62280FL User Manual download pdf (Page 14)

10.9 Cancelling the delay start

To cancel the delay start:

1. Press button Inicio/Pausa to set the

appliance to pause.

The related indicator flashes.

2. Press button Inicio Diferido

repeatedly until the display shows .

3. Press button Inicio/Pausa again to

start the programme immediately.

10.10 Interrupting a

programme and changing a

function

You can change only some options

before they operate.

1. Press button Inicio/Pausa.

The related indicator flashes.

2. Change the function set.

3. Press the button Inicio/Pausa again.

The programme continues.

10.11 Cancelling a programme

1. Turn the programme knob to to

cancel the programme.

2. Turn again the programme knob to a

new washing programme. At this

time you can also set the available

functions.

Before starting the new

programme the appliance

drains the water. Make sure

that the detergent is still in

the detergent compartment,

if not fill the detergent

again.

10.12 Opening the door when

the programme operates

CAUTION!

If the temperature and level

of the water in the drum are

too high, the door lock

indicator stays on and

you cannot open the door.

To open the door proceed as follows:

1. Press the button On/Off for some

seconds to deactivate the appliance.

2. Wait for some minutes and then

open carefully the appliance door.

3. Close the appliance door.

4. Activate the appliance and set the

programme again.

10.13 Opening the door when

the delay start is active

While the delay start operates, the

appliance door is locked.

To open the appliance door:

1. Press button Inicio/Pausa.

In the display the door lock indicator

goes off.

2. Open the appliance door.

3. Close the door and press button

Inicio/Pausa.

The delay start continues.

10.14 End of cycle

When the programme has finished, the

appliance stops automatically. The

acoustic signal operates (if it is active).

In the display

comes on and the door

locked indicator

goes off.

The indicator of Inicio/Pausa button goes

off.

1. Press button On/Off to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last set

programme. Turn the

programme knob to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door ajar, to prevent

mildew and odours

5. Close the water tap.

www.aeg.com

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments