12
Making the Vacuum Cleaner
Ready for Use
The accessories can be connected by pressing
together and turning, and separated by pulling
and turning:
Connect Together the Suction Hose and
Suction Tube.
Firmly connect the suction tube handle to the
suction tube.
Connect the Suction Tubes Together
(depending on model)
Connect the two tubes together.
Adjust the Telescopic Tube
(depending on model)
Push down the button on the tube and adjust
the tube to the desired working position.
Connect the Suction Hose
Plug the suction hose connector into the suc-
tion inlet. The connector clips into place and is
free to rotate.
Press the release button and pull out the con-
nector in order to remove the suction hose.
Mains Connection/Cable Rewind
The mains cable is stored in the cable compart-
ment. Pull out the cable and plug into a mains
socket.
Unplug from the mains socket. Press the foot
button, the cable is automatically rewound after
vacuuming.
13
Using the Nozzles
The nozzles are connected to the suction tube
by pressing and turning, and removed by pulling
and turning.
Using the VARIO 500 Floor Nozzle
For daily care of carpets and hard floors. The
floor nozzle is manually adjustable. Extended
brushes for smooth floors, retracted brushes for
carpets.
See additional accessories for special floor noz-
zles.
Crevice and Upholstery Nozzle Stored in the
Appliance
To meet individual cleaning requirements two
accessories are included with the appliance,
these are stored in an integrated accessories
compartment.
Open the lid of the accessories compartment
upwards at the recessed handle.
The nozzles can be fitted to both the suction
tube and the suction hose handle as required.
Crevice Nozzle
For vacuuming crevices, gaps and corners.
Upholstery Nozzle
For vacuum cleaning all upholstered furniture,
mattresses, etc.
The thread lifting strips on the nozzle even pick
up thread and lint.
Comments to this Manuals