AEG SU86000-4I User Manual download pdf (Page 17)

52

What to do if...

Heavy build up of frost,

possibly also on the door

seal.

Door seal is not air tight

(possibly after reversing

the door).

Carefully warm the leaking

sections of the door seal

with a hair dryer (on a

cool setting). At the same

time shape the warmed

door seal by hand such

that it sits correctly.

Unusual noises.

Appliance is not level.

A component, e.g. a pipe,

on the rear of the appliance

is touching another part of

the appliance or the wall.

Readjust the feet.

If necessary, carefully bend

the component out of the

way.

The compressor does not

start immediately after

changing the temperature

setting.

This normal, no error has

occurred.

Water on the floor or on

storage shelves.

Water drain hole is

blocked.

See the “Cleaning and

Care” section.

The compressor starts after

a period of time.

The food is too warm.

Temperature is not proper-

ly adjusted.

Please look in the “Starting

Up and Temperature regu-

lation” section.

Door was open for an

extended period.

A large quantity of warm

food was placed in the

appliance within the last

24 hours.

The appliance is near a

heat source.

Open the door only as long

as necessary.

Turn the temperature reg-

ulation to a colder setting

temporarily.

Please look in the

“Installation location” section.

Light bulb is defective.

Interior lighting does not

work.

Please look in the “Changing

the Light Bulb” sections.

Symptom Possible Cause Remedy

1 2 ... 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments