8.4 Installing under a
continuous worktop
If your refrigerator is installed under a
continuous worktop, an air outlet
opening of at least 200cm
2
and a
ventilation grille matching the worktop
design should be installed at the rear of
the worktop.
The cut surfaces of the worktop should
be varnished to avoid swelling due to
penetration of moisture.
The appliance wall distance must be at
least 30 mm and should be checked
before the ventilation grille is inserted.
500/550/600 mm
93-103 mm
105 mm
A
200 cm
2
570 mm
min. 820 mm
550 mm
8.5 Detaching the worktop
1. Unscrew the left and the right screws
at the back.
2. Push the worktop backwards and lift
it up.
Store the screws in a safe place together
with the worktop.
8.6 Fitting and mounting to
continuous worktop
Before fitting, change the door opening
direction if necessary (see: Door
reversibility).
1. Push the appliance carefully into the
niche.
Take care that the mains cable is not
jammed in.
2. Check distance from wall (see:
Installing under a continuous
worktop).
3. Level the appliance by screwing the
two adjustable feet at the front in or
out, thus ensuring a stable position.
4. With a suitable screws (depending on
the design of the worktop and the
distance between the appliance and
the worktop, not supplied), fix the
appliance under the worktop through
the upper door hinge.
www.aeg.com
12
Comments to this Manuals