AEG BPE742720M User Manual download pdf (Page 14)

9. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

9.1 Food sensor

The food sensor measures temperature

inside the food. When the food is at the

set temperature, the appliance

deactivates.

There are two temperatures to be set:

• the oven temperature (minimum 120

°C),

• the food core temperature.

CAUTION!

Use only the food sensor

supplied and the original

replacement parts.

Directions for the best results:

• Ingredients should be at room

temperature.

• Food sensor cannot be used for liquid

dishes.

• During cooking the food sensor must

remain in the dish and the plug in the

socket.

• Use recommended food core

temperature settings. Refer to "Hints

and tips" chapter.

The appliance calculates an

approximate end of cooking

time. It depends on the

quantity of food, the set

oven function and

temperature.

Food categories: meat, poultry

and fish

1. Activate the appliance.

2. Insert the tip of the food sensor into

the centre of meat or fish, in the

thickest part if possible. Make sure

that at least 3/4 of the food sensor is

inside of the dish.

3. Put the plug of the food sensor into

the socket located in the front frame

of the appliance.

The display shows the food sensor

symbol.

4. Press or in less than 5

seconds to set the food core

temperature.

5. Set a heating function and, if

necessary, the oven temperature.

6. To change the food core

temperature, press .

When the dish reaches the set

temperature, an acoustic signal sounds.

The appliance deactivates automatically.

7. Touch any symbol to stop the signal.

8. Remove the food sensor plug from

the socket and remove the dish from

the appliance.

WARNING!

There is a risk of burns as the

food sensor becomes hot.

Be careful when you unplug

it and remove it from the

food.

Food category: casserole

1. Activate the appliance.

www.aeg.com

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments