AEG BE5014321M User Manual download pdf (Page 12)

First you set the seconds, then the

minutes and then the hours.

At first, the time is calculated in

minutes and seconds. When the time

you set is longer than 60 minutes, the

symbol comes on in the display.

The appliance now calculates the time in

hours and minutes.

3. The MINUTE MINDER starts

automatically after five seconds.

After 90% of the set time, an acoustic

signal sounds.

4. When the set time ends, an acoustic

signal sounds for two minutes.

"00:00" and flash in the display.

Press any button to stop the acoustic

signal.

If you set the MINUTE

MINDER when the

DURATION or END function

operates, the symbol

comes on in the display.

6.4 Count Up Timer

Use the Count Up Timer to monitor how

long the oven operates. It is on

immediately when the oven starts to

heat.

To reset the Count Up Timer, press and

hold and . The timer starts to count

up again.

The Count Up Timer cannot

be used with the functions:

Duration , End , core

temperature sensor.

7. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

7.1 Using the core

temperature sensor

The core temperature sensor measures

the core temperature of the meat. When

the meat is at the set temperature, the

appliance deactivates.

There are two temperatures to be set:

• The oven temperature. Refer to the

table for roasting.

• The core temperature. Refer to the

table for the core temperature sensor.

CAUTION!

Only use the core

temperature sensor supplied

with the appliance, or

genuine replacement parts.

1. Set the oven function and the oven

temperature.

2. Put the point of the core temperature

sensor (with the symbol on the

handle) into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket on the top of

the cavity.

Make sure that the core temperature

sensor stays in the meat and in the

socket during the cooking.

When you use the core temperature

sensor for the first time, the default

core temperature is 60 °C. While

flashes, you can use the knob for the

temperature to change the default

core temperature.

www.aeg.com

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments