AEG 825D-m User Manual download pdf (Page 13)

Maintenance and care

● The hood must always be disconnected from the mains

power supply before beginning any maintenance work.

Metal grease filter

● The purpose of the grease filters is to aspirate grease particles

which form during cooking and it must always be used, either in

extraction or recirculation mode.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

Open the metal grease filter

● Push the filters towards the

back of the unit and then pull it

down and out.Fig. 4.

Hand washing

Soak grease filters for about one hour in hot water with a grease-

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when it are dry.

Dishwasher

Place the grease filters in a dishwasher. Select the most intensive

washing programme and highest temperature, at least 65°C.

Repeat the process if necessary. Refit the grease filters when they

are dry.

When washing the metal grease filter in the dishwasher a slight

discoloration of the filter can occur, this does not have any impact

on its performance.

● Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Fig. 4

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

AEG 825D-m User Manual Page 13