AEG PROTECT A 1400 Operations Instructions download pdf (Page 21)

5.3 Charging

The PROTECT A. is supplied with its battery fully charged.

Nevertheless, energy may have been lost during transport, so

the battery should be fully recharged before it is used for the

first time.

Connect the input of the UPS (no. 2 in the figure in chapter 4.3

on page 19) to the mains connection cable provided and plug

the mains connector into a suitable shockproof socket. Allow

the UPS to charge up for about 6 hours without any load (i.e.

without any devices such as computers, monitors, etc.

connected to it).

The battery is charged irrespective of the setting

of the main switch on the front of the UPS.

5.4 Connecting the Load (e.g. computer)

Connect your loads to the individual UPS backed-up output

sockets on the rear of the UPS (chapter 4.3 / no. 1 / pg.19).

6 hours

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

No comments

AEG PROTECT A 1400 Operations Instructions Page 21