AEG T75280AC User Manual download pdf (Page 16)

• Use the condensate as distilled water,

e.g. for steam ironing. If it is necessary

clean the condensate before (e.g.

with a coffee filter) to remove possible

small pieces of fluff.

• Always keep the airflow slots on the

bottom of the appliance clear.

• Make sure that is good airflow in the

appliance installation position.

10.2 Adjustment of the

remaining laundry moisture

degree

To change the default degree of the

remaining moisture of the laundry:

1. Turn on the appliance.

2. Wait approximately 8 seconds.

3. Select 1 of available programmes.

4. Push at the same time and hold

down the Dry Plus and Anti-crease

buttons.

One of the symbols goes into the view

on the display:

- the maximum dry laundry

- the more dry laundry

- the standard dry laundry

5. Push the Start/Pause button again

and again until you set necessary

degree.

6. To memorise the setting, push at the

same time the Dry Plus and Anti-

crease buttons for approximately 2

seconds.

10.3 Deactivating the Tank

indicator

1. Turn on the appliance.

2. Wait approximately 8 seconds.

3. Select 1 of available programmes.

4. Push at the same time and hold

down the Dry Plus and Buzzer

buttons.

One of 2 configurations is possible:

• the Tank indicator: is on and the

symbol goes into the

view - the water container

indicator is permanently on

• the Tank indicator: is off and the

symbol goes into the

view - the water container

indicator is permanently off

11. CARE AND CLEANING

11.1 Cleaning the filter

At the end of each cycle the indicator

Filter is on and you must clean the filter.

The filter collects the fluff.

The fluff occurs while the

clothes are dried in the

tumble dryer.

To clean the filter:

1. Open the door. Pull the filter.

2. Open the filter.

3. Use a moist hand to clean the filter.

www.aeg.com16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments