AEG L87695NWD User Manual download pdf (Page 21)

2. If necessary, change the

temperature, the spin speed, the

cycle duration, or add available

options. When you activate an

option, the indicator of the set

option comes on.

If you set something

incorrect, the display shows

the message Err.

9.7 Starting a programme

without the delay start

Press button Départ/Pause to start the

programme.

The relevant indicator stops to flash and

stays on.

On the display the indicator of the phase

is operation starts to flash.

The programme starts, the door is

locked. The display show the indicator

.

The drain pump can operate

for a short time when the

appliance fills water.

9.8 Cycle time recalculation

After approximately 15

minutes from the start of the

programme:

• The appliance adjusts

automatically the cycle

time to the laundry you

have put in the drum to

have perfect washing

results in the minimum

necessary time.

• The display shows the

new time value.

9.9 Starting a programme with

the delay start

1. Press button Départ Différé again

and again until the display shows the

number of minutes or hours of delay.

The related indicator comes on.

2. Press button Départ/Pause.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts automatically.

Before you press button

Départ/Pause to start the

appliance, you can cancel or

change the set of the delay

start.

9.10 Cancelling the delay start

To cancel the delay start:

1. Press button Départ/Pause to set the

appliance to pause.

The related indicator flashes.

2. Press button Départ Différé

repeatedly until the display shows .

3. Press button Départ/Pause again to

start the programme immediately.

9.11 Interrupting a

programme and changing a

option

You can change only some options

before they operate.

1. Press button Départ/Pause.

The related indicator flashes.

2. Change the option set.

3. Press the button Départ/Pause again.

The programme continues.

9.12 Cancelling a running

programme

1. Press button Marche/Arrêt to cancel

the programme and to deactivate

the appliance.

2. Press button Marche/Arrêt again to

activate the appliance.

Now, you can set a new washing

programme.

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Comments to this Manuals

No comments