AEG Welding System 2000 User Manual download pdf (Page 12)

MOUNTING PROTECT PV TO THE WALL

1. Select a wall or solid vertical surface that can support the

PV-Inverter.

2. Protect PV requires adequate cooling space. Allow at least 20cm

space above and below the inverter.

3. Using the mounting frame as a template, drill 4 holes as illustrated in

the following ﬁgures.

4. Fix the mounting frame as the

ﬁgure shows. Do not drive-in the

screws ush to the wall. Instead,

leave 2 to 4mm exposed.

5. Hang the inverter on the

mounting frame.

20 cm space

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

AEG Welding System 2000 User Manual Page 12