AEG SNMP Network Adaptor User Manual download pdf (Page 39)

Figure 38: HTTP - SNMP

• Network Server Settings

The user may activate or deactivate different options from this menu. Telnet and or SNMP may

be switched on or off and the UPSMON access can be blocked. The network speed can also

be selected and the user can select and adjust the desired security level.

Note: Please ensure that in the menu “Network & Security” the option “SNMP

Agent” is enabled. SNMP Traps have nothing to do with RCCMD traps

or the RCCMD shutdown functions. RCCMD works independent from

SNMP.

The submenu displays a column of 10 manager IP-addresses with the corresponding access

permission, the commands and an example. Use this screen to specify which managers have

access to the SNMP adapter agent, the community names (password) and also what type of

access the IP managers have - read only or read and write.

• Configuring Trap-receivers

Use this to determine which IP managers receive traps (messages) from your SNMP-adapter.

The screen permits you to send traps about your UPS to IP-addresses (managers).

Also, the menu for switching authentication and cold boot traps are located here. If activated

these traps are send to the configured SNMP trap receivers in the trap receiver list.

• SNMP Trap Test

In this menu the user may test the SNMP traps, whereas the defined traps are only used for

test purposes and do not represent real traps. The receiver must also be configured in order to

make this test work. Additionally, save the settings and reboot your CS121 before testing the

communication with the configured IP-address. (does not work in configuration mode)

No comments

AEG SNMP Network Adaptor User Manual Page 39