AEG KR8403021M User Manual download pdf (Page 27)

• To clean metal surfaces, use a

dedicated cleaning agent.

• Clean the appliance interior after

each use. Fat accumulation or other

food remains may result in a fire.

• Clean the cavity roof carefully from

food residuals and fat.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with

warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

• Dry the oven when the cavity is wet

after usage.

13.2 Removing the shelf

supports

Before maintenance, make sure that the

appliance is cool. There is a risk of burns.

To clean the appliance, remove the shelf

supports.

1. Pull carefully the supports up and out

of the front catch.

2

3

1

2. Pull the front end of the shelf support

away from the side wall.

3. Pull the supports out of the rear

catch.

Install the shelf supports in the opposite

sequence.

13.3 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen

lamp with a cloth to prevent

grease residue from burning

on the lamp.

1.

Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The top lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

14.

TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

14.1 What to do if...

Problem Possible cause Remedy

You cannot activate or oper-

ate the oven.

The oven is not connected

to an electrical supply or it is

connected incorrectly.

Check if the oven is correctly

connected to the electrical

supply (refer to the connec-

tion diagram if available).

ENGLISH 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments