Aeg HG995440NB User Manual download pdf (Page 17)

WHAT TO DO IF…

Problem Possible cause Remedy

There is no spark when lighting

the gas

• There is no electrical supply • Make sure that the unit is

connected and the electrical

supply is switched on.

• Control the fuse. If the fuse

is released more than one

time, refer to a qualified

electrician.

• Burner cap and crown are

placed uneven

• Make sure that the burner

cap and crown are in correct

positions.

The flame is blow out immedi-

ately after ignition

• Thermocouple is not heated

sufficient

• After lightning the flame,

keep the knob pushed for

approximately 5 seconds.

The gas ring burns unevenly • Burner crown is blocked

with food residues

• Make sure that the injector

is not blocked and the burn-

er crown is clear of food

particles.

If there is a fault, first try to find a solution to the problem yourself. If you cannot find a

solution to the problem yourself, speak your dealer or the local Service Force Centre.

If you operated the appliance incorrectly, or the installation was not carried out by a regis-

tered engineer, the visit from the customer service technician or dealer may not take place

free of charge, even during the warranty period.

Labels supplied with the accessories bag

Stick the adhesive labels as indicated below:

What to do if…

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Aeg HG995440NB User Manual Page 17