Aeg HG995440NB User Manual download pdf (Page 13)

OPERATION

Ignition of the burner

WARNING!

Be very careful when you use open fire in kitchen environment. Manufacturer decline any

responsibility in case misuse of the flame

Always light the burner before you put cookware.

To light the burner:

1. Turn the control knob counterclockwise to the maximum position (

) and push it

down.

2. Keep the control knob pushed for approximately 5 seconds; this will let thermocouple

to warm up. If not, the gas supply will be interrupted.

3. Adjust the flame after it is regular.

If after some tries the burner does not light, check if the crown and its cap are in correct

positions.

Each control knob has a pilot light. It lights up when you turn the control knob.

Operation 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Aeg HG995440NB User Manual Page 13