AEG HK634060XB User Manual download pdf (Page 29)

Problem Possible cause Remedy

The highest heat setting is

set.

The highest heat setting has

the same power as the func-

tion.

You decreased the heat set-

ting to .

Start from and only in-

crease the heat setting.

You cannot activate the out-

er ring.

Activate the inner ring first.

There is a dark area on

the multiple zone.

It is normal that there is a

dark area on the multiple

zone.

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

comes on.

Automatic Switch Off oper-

ates.

Deactivate the hob and acti-

vate it again.

comes on.

The Child Safety Device or

the Lock function operates.

Refer to "Daily use" chapter.

and a number come on.

There is an error in the hob. Disconnect the hob from the

electrical supply for some

time. Disconnect the fuse

from the electrical system of

the house. Connect it again.

If comes on again, speak

to an Authorised Service

Centre.

7.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also

three digit letter code for the glass

ceramic (it is in the corner of the glass

surface) and an error message that

comes on. Make sure, you operated the

hob correctly. If not the servicing by a

service technician or dealer will not be

free of charge, also during the warranty

period. The instructions about the

Service Centre and conditions of

guarantee are in the guarantee booklet.

8. INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 Before the installation

Before you install the hob, write down

the information bellow from the rating

plate. The rating plate is on the bottom

of the hob.

Serial number ...........................

ENGLISH 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Comments to this Manuals

No comments