EN User ManualHobHG795540XB
WARNING!Do not use knives, scrapersor similar instruments toclean the surface of the glassor between the rims of theburners and the frame (ifapplicabl
Problem Possible cause Remedy The fuse is released. Make sure that the fuse isthe cause of the malfunction.If the fuse releases againand again, conta
7.3 Labels supplied with theaccessories bagStick the adhesive labels as indicatedbelow:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.
Make sure that the gassupply pressure of theappliance obeys therecommended values. Theadjustable connection isfixed to the comprehensiveramp by means
8.4 Adjustment of minimumlevelTo adjust the minimum level of theburners:1. Light the burner.2. Turn the knob on the minimumposition.3. Remove the knob
BAA) supplied sealB) supplied bracketsCAUTION!Install the appliance only ona worktop with flat surface.8.8 Possibilities for insertionThe panel instal
Gas connection: G 1/2" Appliance class: 3 9.4 Gas burners for NATURAL GAS G20/G25 20/25 mbarBURNER NORMAL POWERkWMINIMUM POWERkWINJECTOR MARK1/
• Use cookware with diameters applicable to the size of burners.• Center the pot on the burner.• When you heat up water, use only the amount you need.
www.aeg.com18
ENGLISH 19
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.
www.aeg.com/shop867305412-B-072015
1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i
• Do not store items on the cooking surfaces.• Metallic objects such as knives, forks, spoons and lidsshould not be placed on the hob surface since th
• Protect the bottom of the appliancefrom steam and moisture.• Do not install the appliance adjacentto a door or under a window. Thisprevents hot cook
• Remove all the packaging, labellingand protective film (if applicable)before first use.• Use this appliance in a householdenvironment.• Do not chang
• Do not clean the burners in thedishwasher.2.6 DisposalWARNING!Risk of injury or suffocation.• Contact your municipal authority forinformation on how
4.1 Burner overviewABCA) Burner cap and crownB) ThermocoupleC) Ignition candleABCDA) Burner capB) Burner crownC) Ignition candleD) Thermocouple4.2 Ign
The spark generator canstart automatically when youswitch on the mains, afterinstallation or a power cut. Itis normal.Each control knob has a pilotlig
Comments to this Manuals