AUS ERFAHRUNG GUT35773GGas hobOperating and Installation Instructions CZ
10OVERALL DIMENSIONS Width: 680 mm.Depth: 510 mm.Height: 15 mm.Weight: 14,5 Kg.CUT OUT DIMENSIONS Width: 560 mm.Depth: 480 mm.Thickness: 30 mm.HEAT I
11Burner Dia. Tap By-pass1/100 mmAuxiliary 28Semi-rapid 32Rapid 40Triple-Crown 56 Aeration adjustment noneBURNERNORMAL REDUCEDNORMAL POWERPOWER POW
12Installationl The following instructions about installation and maintenance must be carried out byqualified personnel in compliance with the regulat
13Building InA = Auxiliary burner SR = Semi-rapid burnerR = Rapid Burner UR = Triple crown burnerFig. 2510680ASRSRRURThese hobs can be inserted in a b
14 place the hob in the cut out, taking care of itscentring; fix the hob with the relevant screws (Fig. 5).The traction of the screws is able to tra
15Kitchen unit with doorProper arrangements must be taken in designing theforniture unit, in order to avoid any contact with thebottom of the hob whic
16120 cm2180 cm2360 cm250 cm2Fig. 9Fig. 10FO 2041FO 2042550 min.560 min.48030591380140FO 0198Fig. 7FO 2043Fig. 8
17Electrical connectionsThe appliance is designed to be connected to 230 V monophase electricity supply.The connection must be carried out in complian
18Injectors replacement• Remove the pan supports. Remove the burner's caps and crowns. With a socket spanner 7 unscrew and remove theinjectors
19
2Important Safety InformationThese warnings are provided in the interest of safety. You MUST read themcarefully before installing or using the applian
35678-8501 01/03AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberghttp://www.aeg.hausgeraete.deCopyright by AEG From the Electrolux Group.
3it has been installed. Ensure there is a continuous air supply, keeping air vents ingood condition or installing a cooker hood with a venting hose.l
4ContentsFor the UserImportant Safety Information ... 2Guide to Use
5This appliance is manufactured according to the following EECdirectives:73/23 EEC - 90/683 EEC - 93/68 EEC -89/336 EEC - 90/396 EEC,current edition.G
61. Rapid Burner2. Semi-rapid Burners3. Triple-crown Burner4. Auxiliary BurnerDescription of the HobInstallationAny gas installation must be carried o
7Hob BurnersTo light a burner, turn the relevant control knob anticlockwise to the maximumposition ( ), then push it down to ignite the burner.Upon ig
8Before any maintenance or cleaning can be carried out, you must DISCONNECT thehob from the electricity supply.The hob is best cleaned whilst it is st
9Something Not Working?If the hob is not working correctly, please carry out the following checks before contacting yourlocal AEG Service Force Centre
Comments to this Manuals