AEG HG674550VB User Manual download pdf (Page 15)

8.5 Electrical connection

• Make sure that the rated voltage and

type of power on the rating plate

agree with the voltage and the power

of the local power supply.

• This appliance is supplied with a

mains cable and a plug.

• Always use a correctly installed

shockproof socket.

• Make sure that there is an access to

the mains plug after the installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• There is a risk of fire when the

appliance is in connection with an

extension cable, an adapter or a

multiple connection. Make sure that

the ground connection agrees with

the standards and regulations.

• Do not let the power cable to heat up

to a temperature higher than 90° C.

To prevent contact between the cable

and the appliance below the hob use the

clamps which are on the side of the

cabinet.

A

A. Rigid copper pipe or flexible pipe of

stainless steel

8.6 Connection cable

To replace the connection cable use only

the special cable or its equivalent. The

cable type is: H05V2V2-FT90.

Make sure that the cable section is

applicable to the voltage and the

working temperature. The yellow / green

earth wire must be approximately 2 cm

longer than the brown (or black) phase

wire.

8.7 Assembly

ON-TOP INSTALLATION

1.

2.

3.

min.

55 mm

min.

650 mm

560 mm

480 mm

min.

100 mm

30 mm

4.

50 mm

400 mm

ENGLISH

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments