AEG C91900K-MNX05 User Manual

91900KGlaskeramik-KochfeldCeramic glass hobTable de cuisson vetrocéramiqueGlaskeramische kookplaatMontage- und GebrauchsanweisungInstallation and Oper

46Digital DisplaysThe four display fields that are assigned to the four cooking zones dis-play:– _, after being switched on and when the safety functi

47Before Using for the First TimeInitial CleaningWipe the ceramic glass surface with a damp cloth.1 Important: Do not use any caustic, abrasive cleane

48Switching Off the ApplianceTo switch off the appliance completely activate the “On/Off” I sensor field.Touch the “On/Off” sensor field for approx. 1

49Heat Setting SelectionFor setting and adjusting the heat setting (1 to 9) for the selected cooking zone. Use sensor field + to increase the heat set

502. Set the required heat setting. 3. Touch the “booster” sensor field. The middle ring is switched on. The control indicator under the symbol II is

51Switching the Casserole Zone On and Off1. Select the appropriate cooking zone. 2. Set the required heat setting. 3. To switch the casserole zone on

52Switching off a Cooking Zone1. Select the required cooking zone with the cooking zone sensor fields.2. Touch sensor fields + and - simultaneously to

53Cooking with the Automatic Warm up FunctionAll four of the hob's cooking zones can be controlled in nine stages and have an automatic warm up f

542 If you start cooking again on a cooking zone that is still warm, the au-tomatic warm up function uses the residual heat. This saves time and energ

55Locking/Unlocking the Control PanelWith the exception of the “On/Off” sensor field the control panel can be locked at any required time during cooki

38Dear customer,Please read these operating instructions carefully.Pay particular attention to the section “Safety information” on the first few pages

56TimerA cooking duration can be set with the integrated timer for all cooking zones. When the end of the cooking duration is reached, the cooking zon

573 To set the timer more quickly, leave your finger on the + or - sensor field until the required time is reached.If the - sensor field is operated f

58Power ManagementIf a high heat setting (8 or 9) is set for the front left, rear right and front right cooking zones simultaneously, the hob control

59Example: Cooking zone Heat setting Display1. front left 9 7 and 9 alternately2. rear right 9 7 and 9 alternately3. front right 9 9change front left

60Uses, Tables and TipsPansThe better the pan, the better the results.• You can recognise good pans by their bases. The base should be as thick and fl

61Advice on Cooking with and without Automatic Warm upThe automatic warm up function is suitable for:• dishes that start off cold, are heated up at hi

62Typical Heat SettingsThe information given in the following tables is for guidance. The heat setting required for cooking depends on the quality of

63Cleaning and CareHob1 Important: Cleaning agents must not come into contact with the hot ceramic glass surface! All cleaning agents must be removed

641 Problem Dirt1. Remove burnt-on sugar, melted plas-tic, aluminium foil or other meltable materials with a glass scraper imme-diately and while stil

65What to do if …Rectifying faultsIt is possible that faults have been caused by a minor error, which you can correct yourself with the help of the fo

39ContentsOperating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Safety . . . . . . . . . . . . . . . . . .

66... after switching off the cooking zones, neither _ nor h for re-sidual heat appears in the display?Check whether – the cooking zone was only used

67Installation Instructions1Important! The new appliance may only be installed and connected by qualified personnel.Please observe this instruction, o

68Regulations, Standards, DirectivesThis appliance meets the following standards:• EN 60 335-1 and EN 60 335-2-6relating to the safety of electrical a

691 Safety Instructions for the Installer• A device must be provided in the electrical installation which allows the appliance to be disconnected from

70Electrical ConnectionBefore connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds

71

72

73ServiceIn the “What to do if …” section a number of malfunctions are listed that you can rectify yourself Look there first if a fault occurs. Is it

146Montage / Assembly

147

40Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Technical Data . . . . . . . . . . . . . . . . . .

From the Electrolux Group. The world´s No.1 choice.The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning an

41Operating Instructions1 SafetyThe safety aspects of this appliance comply with accepted technical standards and the German Appliance Safety Law. How

42• Overheated fats and oils catch fire quickly. You should supervise cooking when preparing foods in fat or oil (e.g. chips).• Switch off the cooking

432 DisposalDisposing of the packaging materialAll materials used can be fully recycled.Plastics are marked as follows:• >PE< for polyethylene,

44The Key Features of Your Appliance• Glass ceramic cooking surface: The appliance has a glass ceramic cooking surface and 5 rapid response cooking zo

45Description of the ApplianceCooking zones and control panel Triple ring cooking zone 2700WCasserole zone2200WSingle ring cooking zone 1200WSingle ri