AEG SKD71800S0 User Manual download pdf (Page 11)

Problem Possible cause Solution

The appliance is

noisy

The appliance is not sup-

ported properly

Check if the appliance

stands stable (all the four

feet should be on the floor)

The appliance does

not operate. The

lamp does not oper-

ate.

The appliance is switched

off.

Switch on the appliance.

The mains plug is not

connected to the mains

socket correctly.

Connect the mains plug to

the mains socket correctly.

The appliance has no

power. There is no volt-

age in the mains socket.

Connect a different electri-

cal appliance to the mains

socket.

Contact a qualified electri-

cian.

The lamp does not

work.

The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the

lamp".

The compressor op-

erates continually.

The temperature is not

set correctly.

Set a higher temperature.

The door is not closed

correctly.

Refer to "Closing the

door".

The door has been

opened too frequently.

Do not keep the door

open longer than necessa-

ry.

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

The room temperature is

too high.

Decrease the room tem-

perature.

The compressor

does not start im-

mediately after

pressing the COOL-

MATIC switch, or af-

ter changing the

temperature.

This is normal, no error

has occurred.

The compressor starts after

a period of time.

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Comments to this Manuals

No comments