AEG S83400CTW0 User Manual download pdf (Page 24)

10. Install the handle in the opposite side.

Re-screw the handle bracket on the

door (h4). Turn the handle bracket with

the handle and screw them to the door

(h5) and the fitted handle bracket (h6).

11. Re-insert the lower door on the lower

hinge pivot (b2).

12. Insert the middle hinge (m2) into the

left drill of the lower door.

13. Unscrew the upper hinge pivot (t1) and

place it on the opposite side.

14. Fit the upper door on the upper door

pivot.

15. Re-insert the upper door on the middle

hinge pivot (m5) slightly tilting both

doors.

16. Re-screw the middle hinge (m2). Do not

forget the plastic spacer (m1).

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the gasket.

In case you do not want to carry out the above mentioned operations, contact the nearest

After Sales Service Force. The After Sales Service specialist will carry out the reversibility of

the doors at your cost.

ENVIRONMENTAL CONCERNS

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product,

please contact your local council, your household waste disposal service or the shop where

you purchased the product.

h4 h5 h6

24 Environmental concerns

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

No comments

AEG S83400CTW0 User Manual Page 24