AEG S71700TSW0 User Manual download pdf (Page 11)

8.3 Location

It must be possible to

disconnect the appliance

from the mains power

supply; the plug must

therefore be easily

accessible after installation.

The appliance should be installed well

away from sources of heat such as

radiators, boilers, direct sunlight etc.

Ensure that air can circulate freely around

the back of the cabinet. To ensure best

performance, if the appliance is

positioned below an overhanging wall

unit, the minimum distance between the

top of the cabinet and the wall unit must

be at least 100 mm . Ideally, however, the

appliance should not be positioned

below overhanging wall units. Accurate

levelling is ensured by one or more

adjustable feet at the base of the

cabinet.

100 mm

15 mm 15 mm

8.4 Installing under a

continuous worktop

If your refrigerator is installed under a

continuous worktop, an air outlet

opening of at least 200cm

2

and a

ventilation grille matching the worktop

design should be installed at the rear of

the worktop.

The cut surfaces of the worktop should

be varnished to avoid swelling due to

penetration of moisture.

The appliance wall distance must be at

least 30 mm and should be checked

before the ventilation grille is inserted.

500/550/600 mm

93-103 mm

105 mm

A

200 cm

2

570 mm

min. 820 mm

550 mm

8.5 Detaching the worktop

1. Unscrew the left and the right screws

at the back.

2

3

1

2. Push the worktop backwards and lift

it up.

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments