AEG AHB51021AW User Manual download pdf (Page 23)

23

ENGLISH

Customer Service

If your appliance is still not working

properly after making the above checks,

contact the nearest service centre.

To obtain fast service, it is essential that

when you apply for it you specify the

model and serial number of your appli-

ance which can be found either on the

guarantee certicate or on the rating plate

located on the external right side of the

appliance.

9. INSTALLATION

WARNING!

Refer to Safety chapters.

Positioning

CAUTION!

If you are discarding an old appli-

ance that has a lock or catch on

the lid, you must ensure that it is

made unusable to prevent young

children being trapped inside.

This appliance should be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate class Ambient temperature

SN +10ºC to +32ºC

N +16ºC to +32ºC

ST +16ºC to +38ºC

T +16ºC to +43ºC

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation can

only be guaranteed within the

specied temperature range. If you

have any doubts regarding where

to install the appliance, please turn

to the vendor, to our customer

service or to the nearest Service

Centre

The appliance shall have the plug

accessible after installation.

Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your domestic

power supply.

• The appliance must be earthed. The

power supply cable plug is provided with

a contact for this purpose. If the domes

-

tic power supply socket is not earthed,

connect the appliance to a separate

earth in compliance with current regula

-

tions, consulting a qualied electrician.

• The manufacturer declines all responsi

-

bility if the above safety precautions are

not observed.

• This appliance complies with the E.E.C.

Directives.

Ventilation requirements

The airow behind the appliance must be

sufcient.

1. Put the freezer in horizontal position

on a rm surface. The cabinet must be

on all four feet.

2. Make sure that the clearance between

the appliance and rear wall is 5 cm.

3. Make sure that the clearance between

the appliance and the sides is 5 cm.

AHB41011AW_AHB51021AW_AEG.indd 23 2017-06-08 14:21:32

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

Comments to this Manuals

No comments