AEG AGS88800F1 User Manual download pdf (Page 29)

Problem Possible cause Solution

Temperature is set incorrect-

ly.

Refer to "Operation" chap-

ter.

The compressor does not

start immediately after

pressing the FROSTMATIC,

or after changing the tem-

perature.

This is normal, no error has

occurred.

The compressor starts after a

period of time.

Temperature cannot be set. The FROSTMATIC or COOL-

MATIC function is switched

on.

Switch off FROSTMATIC or

COOLMATIC manually, or

wait until the function resets

automatically to set the tem-

perature. Refer to "FROST-

MATIC or COOLMATIC

function".

DEMO appears on the dis-

play.

The appliance is in demon-

stration mode.

Keep the button pressed for

approximately 10 seconds

until a long sound is heard

and display shuts off for a

short time.

The temperature in the ap-

pliance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products tem-

perature decrease to room

temperature before storage.

Many food products are

stored at the same time.

Store less food products at

the same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened

often.

Open the door only if neces-

sary.

The FROSTMATIC function

is switched on.

Refer to "FROSTMATIC

function".

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

If the advice does not lead

to the desired result, call the

nearest Authorized Service

Centre.

8.2 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

ENGLISH 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Comments to this Manuals

No comments