AEG ARC2790-4GA User Manual download pdf (Page 29)

What to do if ...

67

Large accumulation of

frost in the appliance,

perhaps also at the door

seal.

Door is not properly sealed

(perhaps after re-hanging

door).

Carefully warm the door

seal with a hand-held hair

dryer at those points which

are not airtight (no warmer

than approx. 50°C). At the

same time, shape the

warmed door seal by hand,

so that it is again properly

seated.

Unusual noises.

Appliance is not level.

Readjust the front levelling

feet.

Appliance is in contact

with wall or other objects.

Push appliance away a

short distance.

A part at the back of the

appliance, e.g. a tube, is in

contact with another

appliance part or the wall.

Bend this part away

carefully if necessary.

The compressor does not

start immediately after

pressing the FREEZE

button, or after changing

the temperature setting.

This is normal, no error has

occurred.

The compressor starts after

a period of time.

Compressor does not start

after appliance is switched

on.

Within the first 5 minutes

after switching the

appliance on, the

electronics initialise a self-

test.

The compressor is started

automatically, after the

self-test has been

completed.

Only temperatures above

0 °C can be set, although

the appliance should be

used as a freezing unit.

The appliance is in the

operation mode "Cooling".

Selecting the operation

mode "Freezing". For that,

please refer in the "Select

Freezing or Cooling"

chapter.

Only temperatures below

0 °C can be set, although

the appliance should be

used as a cooling unit.

The appliance is in the

operation mode "Freezing".

Select the operation mode

"Cooling". For that, please

refer in the chapter "Select

Freezing or Cooling".

Malfunction Possible cause Remedy

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 38 39

Comments to this Manuals

No comments