AEG ARC2790-4GA User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
55
3
The FAST CHILL function now caters for intensive cooling. Thereby a SET
temperature of +2 °C is automatically preset. After 6 hours have lapsed,
the FAST CHILL function is independently ended. The originally set SET
temperature is again decisive and the temperature display again
displays the momentary freezing-room temperature.
0 You can manually terminate the FAST CHILL function at any time, in
that you press the FAST CHILL/FAST FREEZE button anew.
Attention! While the FAST CHILL function is switched on, the tempe-
rature regulator should not be driven from the recessed position in
order to avoid an inadvertent adjustment of the originally set SET
temperature.
Adjusted SET temperature is not recognisable when the FAST CHILL
function is switched-on! By an extended temperature regulator, "IC" for
intensive cooling appears in the temperature display instead of the SET-
temperature.
If you are not sure whether the SET temperature was inadvertently
altered, please verify after termination of the FAST CHILL function.
Switch on FAST FREEZE
(Only possible in the operating mode "Freezing")
The FAST FREEZE function caters for fast freezing of fresh
foodstuffs and simultaneously protects the already stored
foodstuffs against undesired temperature rise in the freezing
room.
0 Press the FAST CHILL/-FREEZE button.
The yellow control display near FAST CHILL/FAST FREEZE button
illuminates.
3
The electronics of the appliance independently recognises when the
quick freezing process can be terminated, and then switches off the
FAST FREEZE function automatically (depending on the quantity to be
frozen after 30 to maximum 51 hours).
0 You can stop the fast freezing process manually at any time by pressing
the FAST CHILL/FAST FREEZE button again.
Attention! While the FAST FREEZE function is switched on, the tempe-
rature regulator should not be driven from the recessed position, in
order to avoid an inadvertent adjustment of the originally set SET
temperature.
Adjusted SET temperature is not recognisable when FAST CHILL
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 38 39

Comments to this Manuals

No comments