USER MANUALEN User ManualDishwasherFSK93800P
Settings Values DescriptionMyFavourite List of programmes Set your favourite daily pro-gramme. Refer to specific in-formation provided in thischapter.
5. Press the OK key to change the valuefrom ON to OFF or vice versa.6. Press repeatedly the Option key untilthe display shows the programmelist.6.3 Ho
To improve the drying performance referto the XtraDry option or activateAutoOpen.7. OPTIONSDesired options must beactivated every time beforeyou start
7.3 XtraDryActivate this option when you want toboost the drying performance. With useof this option, the duration of someprogrammes, water consumptio
Water hardnessGerman de-grees (°dH)French degrees(°fH)mmol/l Clarke de-greesWater softener lev-el47 - 50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83 7
5. Turn the cap of the salt containerclockwise to close the salt container.CAUTION!Water and salt can come outof the salt container whenyou fill it. A
9. DAILY USE1. Open the water tap.2. Press the on/off button to activatethe appliance.Make sure that the appliance is inprogramme selection mode.• If
9.2 Using the detergentABCCAUTION!Only use detergentspecifically designed fordishwashers.1.Press the release button (A) to openthe lid (C).2. Put the
If the door is opened formore than 30 secondsduring the drying phase, therunning programme will end.This will not happen if thedoor is opened byAutoOp
10.2 Using salt, rinse aid anddetergent• Only use salt, rinse aid and detergentfor dishwasher. Other products cancause damage to the appliance.• In ar
CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...
11. CARE AND CLEANINGWARNING!Before maintenance,deactivate the appliance anddisconnect the mains plugfrom the main socket.Dirty filters and cloggedspr
CAUTION!An incorrect position of thefilters can cause badwashing results and damageto the appliance.11.2 Cleaning the upper sprayarmWe recommend to cl
• To maintain the performance of yourappliance at its best, we recommendusing a specific cleaning product fordishwashers (at least once a month).Follo
Problem and alarm code Possible cause and solutionThe appliance stops andstarts more times during op-eration.• It is normal. It provides optimal clean
Problem Possible cause and solutionPoor drying results. • Tableware has been left for too long inside a closedappliance.• There is no rinse aid or the
Problem Possible cause and solutionLimescale deposits on the ta-bleware, on the tub and onthe inside of the door.• The level of salt is low, check the
marked with the symbol with thehousehold waste. Return the product toyour local recycling facility or contactyour municipal office.*www.aeg.com26
ENGLISH 27ENHazardous substancesParts Name Pb Hg Cd Cr6+ PBBs PBDEsCabinetXTubSump & hydraulics (including pumps, heater & sensors)XSoftener &
www.aeg.com/shop117876230-A-492017
manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa
• Do not leave the appliance with the open doorunattended to avoid stepping accidentally onto it.• Before any maintenance operation, deactivate theapp
WARNING!Dangerous voltage.• If the water inlet hose is damaged,immediately close the water tap anddisconnect the mains plug from themains socket. Cont
3. PRODUCT DESCRIPTION549 6713 12111014 2318 1Top spray arm2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dis
When AutoOpen is activatedduring the drying phase, theprojection on the floor maynot be completely visible. Tocheck the remaining time ofthe running p
5. PROGRAMMESProgramme Degree of soilType of loadProgramme phases OptionsECO 50° 1)• Normal soil• Crockery and cut-lery• Prewash• Wash 50 °C• Rinses•
Programme Degree of soilType of loadProgramme phases OptionsPrewash 6)• All • Prewash 1) With this programme you have the most efficient use of water
Comments to this Manuals