AEG FSE73700P User Manual download pdf (Page 13)

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in

programme selection mode.

• If the rinse aid empty message is

shown fill the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme

for the type of load and the degree

of soil.

9.1 Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3. Press repeatedly until the display

shows the number of the chosen

programme. The display shows the

programme number for

approximately 3 seconds and then

shows the programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with

delay start

1. Set a programme.

2. Press again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

The delay indicator comes on.

3. Close the appliance door to start the

countdown.

While a countdown is running it is

possible to increase the delay time but

not to change the selection of the

programme and options.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry

function.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments