AEG FSE73700P User Manual download pdf (Page 11)

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

If, afterwards, the door is

closed for another 3

minutes, the running

programme ends.

AirDry is automatically activated with all

programmes excluding

(if

applicable).

To improve the drying performance refer

to the XtraDry option or activate AirDry.

CAUTION!

If children have access to the

appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press .

• The indicators

, and are

off.

• The indicator still flashes.

• The display shows the current

setting.

– = AirDry is deactivated.

– = AirDry is activated.

2.

Press

to change the setting.

3. Press on/off to confirm the setting.

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you select non compatible

options, the appliance

automatically deactivates

one or more of them. Only

the indicators of the still

active options are on.

7.1 TimeSaver

The TimeSaver allows to reduce the

duration of a selected programme by

approximately 50%.

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

This option increases the pressure and

the temperature of the water. The

washing and the drying phases are

shorter.

By default, TimeSaver is off, but it is

possible to activate it manually. This

option cannot be combined with

XtraDry.

How to activate TimeSaver

Press .

The related indicator is on.

The display shows the updated

programme duration.

7.2 XtraDry

Activate this option to boost the drying

performance. With XtraDry on, the

duration of some programmes, water

consumption and the last rinse

temperature can be affected.

XtraDry is a permanent option for all

programmes other than and

need not to be selected at every cycle.

In the other programmes the setting of

XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any

time.

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments