AEG FAV86050U-M User Manual download pdf (Page 13)

Operating Instructions

If the water softener is electronically set at “1” for the purpose of using

detergent that includes special salt, the special salt indicator is deacti-

vated.

Adding special salt

If you are using dishwasher detergent and special salt separately, add

the special salt:

– Before using the dishwasher for the first time.

– When the indicator for special salt SALT is illuminated on the control

panel.

0 1. Open the door, remove the lower

rack.

2. Undo the lid on the salt container by

turning it anticlockwise.

3. Only when using for the first time:

fill the salt container with water.

4. Place the funnel supplied on the

container opening.

Fill the container with special salt

through the funnel; the capacity of

the container is approx. 1.0-1.5 kg

depending on the grain size. Do not

overfill the salt container with special salt.

The water expelled by filling the salt container with special salt runs

out of the salt container onto the base of the washing compartment.

This is not a cause for concern, the water will be pumped out at the

start of the next wash programme.

5. Clean any salt remnants on the container opening.

6. Turn the lid clockwise to the stop, otherwise special salt will leak into

the wash water, this could lead to poor wash results. To avoid this run a

rinse programme after filling the salt container with special salt. This

will wash away salt water and any salt crystals that have been spilt.

Depending on the size of the salt grains, it can take several hours for

the salt to dissolve in the water and for the SALT indicator to extin-

guish.

The setting of the water softener and thus the consumption of salt are

dependent on the hardness of the local water.

SALE

SALT

SALZ

SEL

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

No comments

AEG FAV86050U-M User Manual Page 13